All data about ALUMERO easyBRIDGE Sandwich

Your big plus

10 years

guarantees the best
functionality

Direct force transfer of the loads into the purlins through drilling screws with support thread
Different carrier profile dimensions allow larger purse distances
Additional sealing between roof covering and trapezoidal sheet-metal bridge Plus using pre-assembled EPDM rubber
Horizontal module arrangement and clamping on the long module side
Thanks to aluminum, lightweight and resilient

Description

Area of application

Sandwich roof

roof slope

Up to 45°

connection

4 pcs Drilling screws (screw connection directly into the substructure/purlins)

Min. sheet thickness

Steel sheet min. 0.4 mm, aluminum min 0.5 mm

High bead trapezoidal sheet

Minimum width 25 mm

High bead spacing

Trapezoidal sheet metal bridge 400:100-170/190-333 mm | Trapezoidal sheet metal bridge 250:65-207 mm

Distance from the ground

Distance from roof edge

Roof areas F and G can be occupied in accordance with EN 1991-1-4

Module orientation

Horizontally

Module dimensions

Any length and width

Installation angle

Row spacing

Max. terrain slope

Min. & max. field size

Max. 12 meters in the rail direction

rassemblement

Parallel roof, cross connection

Max. building height

25 m (higher on request)

Max. snow/wind load

Are determined on a project-specific basis using online software Alumero.Pro.Tool

roof condition

The static load capacity of the roof structure and the building structure must be ensured on site

Design/stability

Construction requirements

Module approval

Components

Materials

Load-bearing components made of aluminum EN AW 6063 T66; small parts made of stainless steel A2-70; EPDM