Your big plus
10 years
guarantees the best
functionality
functionality
- With additional adapters, the 5° or 7° modules are extended
- Roof pitch including additional module inclination max. 20°
- Chipless mounting with special drilling screws
- Pre-assembled EPDM rubber for additional sealing between roof covering and trapezoidal sheet bridge
- Module orientation vertically and horizontally
- Thanks to aluminum, lightweight and resilient
Specifications
Description
Area of application
Trapezoidal sheet metal roof
roof slope
5-13° with horizontal module arrangement, 5-15° with vertical module arrangement
connection
4 pcs Drilling screws (screw connection directly into the trapezoidal sheet)
Min. sheet thickness
Steel sheet min. 0.5 mm, aluminum min 0.75 mm
High bead trapezoidal sheet
Minimum width 25 mm
High bead spacing
Trapezoidal sheet metal bridge 400:100-170/190-333 mm | Trapezoidal sheet metal bridge 250:65-207 mm
Distance from the ground
Distance from roof edge
Roof areas F and G can be occupied in accordance with EN 1991-1-4
Module orientation
Vertically and horizontally
Module dimensions
Any length and width
Installation angle
Row spacing
Max. terrain slope
Min. & max. field size
Max. 12 meters in module clamping direction
rassemblement
Parallel to the roof
Max. building height
25 m (higher on request)
Max. snow/wind load
Are determined on a project-specific basis using online software Alumero.Pro.Tool
roof condition
The static load capacity of the roof structure and the building structure must be ensured on site
Design/stability
Construction requirements
Module approval
Components
Materials
Load-bearing components made of aluminum EN AW 6063 T66; small parts made of stainless steel A2-70; EPDM
Technical drawings
No items found.
components
Standard
Trapezoidal sheet metal bridge Plus 400
Product number:
802445
Trapezoidal sheet metal bridge 2.1 Plus L=250
Product number:
802452
Front part plus
Product number:
802446
Rear part Plus
Product number:
802447
Fastening set plus
Product number:
802448
End clamp "Click" with pin
Product number:
802304C P1 30-42
Middle clamp "Click" 2.1 with pin 30-45
Product number:
802301C P1 30-45
Middle clamp "Click" 2.1 30-45
Product number:
802301C 30-45
Optional
No optional components to this system.
Produktnummer:
-/-
Zubehör
Cable tie including clip
Produktnummer:
802604
Wire clamp 8-10
Produktnummer:
802603
Round wire
Produktnummer:
802602
ALUMERO solar.pro.tool
Project planning in just 8 steps
1.
master data
2.
roof data
3.
roof capture
4.
PV modules
5.
construction
6.
CAD plan
7.
statics
8.
list of materials
We give our customers the opportunity to create technical, project-related system designs including static calculation and project reports using ALUMERO solar.pro.tool online software.
Contact
Please fill out the form completely and we will get back to you shortly.