Your big plus.
10 years
guarantees the best
functionality
functionality
- Wind tunnel tested
- Quick and easy assembly thanks to pre-assembled components
- Low transport costs
- Optimal module ventilation
- There is water drainage on all sides
- Aluminum/stainless steel main structure
- Module clamps with integrated earthing pins
- Lightweight and resilient
- TÜV certified according to UL 2703
specifications
Description
Aerodynamic mounting system for mounting framed PV modules on open spaces.
Area of application
On green and arable land as well as on sand, gravel, concrete or asphalt
roof slope
connection
Min. sheet thickness
High bead trapezoidal sheet
High bead spacing
Distance from the ground
Approx. 400 mm
Distance from roof edge
Module orientation
Module dimensions
950 — 1,150 mm × 1,500 — 2,250 mm (width × length)
Installation angle
10°, on both sides
Row spacing
8° internal shading angle: 609 mm
Max. terrain slope
Up to 10° possible without ground anchor, above 10° only with ground anchor
Min. & max. field size
Min. 2 double rows of 2 modules each, max. 12 × 16 double rows, 384 modules or 25 × 40 m
rassemblement
Max. building height
Max. snow/wind load
Pressure load up to 2.4 kN/m2, suction load up to 2.4 kN/m2
roof condition
Design/stability
Software-based on wind tunnel tests
Construction requirements
Sufficient load-bearing capacity and pressure resistance of the soil must be ensured on site. The general business and warranty conditions as well as the user agreement apply.
Module approval
The module approval must be obtained from the module manufacturer or from the corresponding data sheet.
Components
Module clamps with grounding pin, open space bracket, ballast stones, ballast pans, ground anchors
Materials
Load-bearing connectors made of aluminum EN AW 6060 T64, module clamps made of aluminum EN AW 6063 T66, screws made of stainless steel A2-70, wind deflectors and ballast pans made of steel with alu-zinc coating, polyester fleece construction protection mat
Technical drawings
No items found.
No items found.
No items found.
components
No items found.
ALUMERO solar.pro.tool
Project planning in just 8 steps
1.
master data
2.
roof data
3.
roof capture
4.
PV modules
5.
construction
6.
CAD plan
7.
statics
8.
list of materials
We give our customers the opportunity to create technical, project-related system designs including static calculation and project reports using ALUMERO solar.pro.tool online software.
Contact
Please fill out the form completely and we will get back to you shortly.