All data about ALUMERO easySPEED

Download as a PDF.

No roof damage with easySPEED thanks to optimal load distribution

10 years

guarantees the best
functionality

Low point load thanks to large support plates
Voltage-free module storage thanks to movable adapter
Module clamps with grounding pins
No rails, low thermal expansion and optimal water drainage
Module clamping is possible on the short and long side of the module
Pre-assembled fleece building protection mats (without plasticizer)
Ballast optimized (aerodynamic)
One uniform screw for all connections
Penetration-free assembly

Specifications

Description

Area of application

Foil, bitumen and gravel roofs

roof slope

Up to 5° depending on roof conditions, without roof connection

connection

All roof areas in accordance with EN 1991-1-4

Min. sheet thickness

High bead trapezoidal sheet

High bead spacing

Distance from the ground

approx. 70 mm

Distance from roof edge

Module orientation

East/West and South

Module dimensions

Width: 950 - 1200 mm x Length: 1650 - 2300 mm

Installation angle

10°

Row spacing

South 18°: 563 mm; South 25°: 396 mm; East/West: 376 mm

Max. terrain slope

Min. & max. field size

Max. 21 x 21 meters

rassemblement

Max. building height

≤ 25 m

Max. snow/wind load

Wind: up to 2.4 kN/m²; snow: up to 5.4 kN/m²; calculation in accordance with DIN EN 1991- 1-3:2010 -12 using Alumero.pro.tool

roof condition

Foil, bitumen and gravel roofs

Design/stability

Software-based on wind tunnel tests

Construction requirements

The static load capacity of the roof structure and the building structure as well as an adequate pressure load capacity of the thermal insulation must be ensured on site.

Module approval

Framed modules from all manufacturers

Components

Materials

aluminium EN AW 6063/ 6005; steel sheets with alu-zinc coating; Small parts made of stainless steel A2-70; construction protection mat made of polyester fleece

Technical drawings