PV mounting systems

System- and OEM producer with focus on racking technology.

Pitched roof AS 2.1

ALUMERO offers an affordable, simply- and quickly assembled system for pitched roofs. AS 2.1 includes statically-optimised profiles and pre-assembled components. ALUMERO supports customers setting up the mounting system with ALUMERO.PRO.TOOL. The software creates project reports, part lists and testable structural statics for every project.

01

Statics

Statically perfectly optimized profiles

02

Easy

All clamps can be mounted from above

03

Fast

Pre-mounted clamps for quick mounting times

Tiled roofs

  • A variety of roof hooks for tiled, slated and beaver tail roofs

  • Adjustable aluminium roof hooks with pre-assembled components

  • Truss profiles can be mounted as single-direction rails or as a lattice construction

  • Module can be mounted horizontally or vertically

  • Lightweight and stress-resistant

  • Stronger version with harder aluminium alloy

  • Designed for roof gradients of 10° to 60°

Hanger bolts and solar fasteners

  • simple truss profile mounting due to pre-mounted rapid installation adapter

  • Includes pre-installed EPDM rubber

  • Truss profiles can be mounted as single-direction rails or as a lattice construction

  • Module can be mounted horizontally or vertically

  • Designed for roof gradients of 10° to 60°

Sandwich roof

  • Load transferred straight to the purlins via drilled-in screws with support threads

  • Variety of truss profile dimensions allow for greater gaps along purlins

  • Additional sealing between roof cladding and trapezoidal bridge 'Plus' via pre-installed EPDM rubber

  • Horizontal module mounting and clamping along the long side of the module

  • Designed for roof gradients of 5° to 35°

Standing seam sheet metal roof

  • Sheet metal folding clamps for a wide variety of folds

  • Simple truss profile mounting due to pre-mounted rapid installation adapter

  • Non-penetrative attachment via fixing screw

  • Tested and statically approved sheet metal fold clamps

  • Module can be mounted vertically or horizontally

  • Designed for roof gradients of 7° to 60°

Trapezoidal bridge

  • Simple mounting on aluminium and steel trapezoidal sheet roofing

  • Non-shearing attachment via special drilling screws

  • Pre-installed EPDM rubber provides additional sealing between roofing and trapezoidal bridge

  • Module can be mounted vertically or horizontally

  • Designed for roof gradients of 5° to 35°

Short rail

  • Simple mounting on aluminium and steel trapezoidal sheet roofing

  • Non-shearing attachment via special drilling screws

  • Pre-installed EPDM rubber provides additional sealing between roofing and short rail

  • Module mounted horizontally

  • Clamping on the long side of the module

  • Designed for roof gradients of 5° to 25°

Trapezoidal bridge Plus (extra tilt)

  • Non-shearing attachment via special drilling screws

  • Additional adapters allow modules to be raised another 5°- 7°  

  • Pre-installed EPDM rubber provides additional sealing between roofing and trapezoidal bridge

  • Module can be mounted vertically or horizontally

  • Maximum roof gradient including additional gradient of module 20°

Trapezoidal bridge Plus (extra tilt) for curved roofs

  • Additional adapters compensate the curvature of barrel roofs 

  • Modules can be mounted parallel on roofs with a radius of > 3.5m 

  • Non-shearing attachment via special drilling screws 

  • Pre-installed EPDM rubber provides additional sealing between roofing and trapezoidal bridge

  • Module can be mounted vertically or horizontally

Schrägdachsysteme
Schrägdachsysteme
Schrägdachsysteme

Contact

Please complete this form. We will contact you shortly. For all other inquiries please send an email to alumero@alumero.at.

Total requirement substructure

proportionally: